Tabuchi Electric EneTelus EHW-S55P3B-PNUS Manuel D'installation page 9

Cabinet LCD
Status Display
G-RUN S-RUN
G-STOP S-STOP
G-STBY S-STBY
FAULT ShtDwn
（G：Grid S：Stand-alone）
Display
Operating Mode
BACmod
MAXmod
ECOmod
Remote Control Panel
Button Name on Display Area
Displays functions that are executed from the below operating
buttons below. (Indications change according to the screen.)
Use the operating buttons below to execute the desired functions.
(The display is not a touch screen panel.)
To select function [ENTER], press the operating button directly
below it.
Operating Button
Execute the functions appearing on the display. (If the display
disappears, pressing any of the operating buttons lights up the
display and the home screen appears.)
Button colors and functions
Green: Running grid-tied operation
Red: Running stand-alone operation
Flashing red: Automatically stopped
Lights OFF: Grid-tied operation manually stopped
Stand-alone operation manually
stopped
Grid-tied operation standby
Stand-alone operation standby
Bus Voltage (V)
During solar power generation: Approx. 420 V
No PV generation: Approx. 370 V
Line power only: Approx. 280 V
Storage Battery Charge (%)
Not for customer use
Display
Displays operating status of the inverter.
RUN /STOP Button
This button does not operate if
there is a grid outage, no solar
power being generated, or if the
storage batteries are not
charged (drained, disconnected,
or stopped due to a malfunction.)
How to read
RUN/STOP Button
GRID-TIED MODE:Green(SELL)
STAND-ALONE MODE:Green
Others:Lights OFF
:Orange(BUY)
09