Fisher & Paykel WA42T26GW1 Guide D'installation Et D'utilisation page 33

First RINSE or SPIN light is flashing as well as the SPIN SPEED light.
Wash load is out of balance. Ensure the machine is stationary. Manually redistribute the load.
Check machine is level. Ensure the machine's feet have been unscrewed and the rubber
leveling inserts have been fitted so the machine sits on its feet and not on the corner cabinets.
Refer to 'Installation Instructions' pages 6 – 7.
Lid Lock light is flashing.
Make sure the lid is closed.
Press START/PAUSE (refer to page 15).
Single beep every second and...
The pattern of lights is unfamiliar.
Unplug machine from the wall. Wait 60 seconds, plug back in and operate machine.
1
If the fault re-occurs repeat step 1.
2
If the problem persists refer to the service contacts below. Before calling for help please locate
the serial number of your washer. This is located on the back top left corner.
Service
For your local Fisher & Paykel Authorized Service Agent please call:
USA and Canada
TOLL FREE 1.888.9.FNP.USA (1.888.936.7872)
or use the link at: www.fisherpaykel.com
Note: proof of purchase is required for any warranty claim. For your records we suggest you
attach your proof of purchase here.
If your Ecosmart beeps for help
™
US
31
CA