End Of Cycle Beeps; Default Rinse Option; Volume Of Water Used In The Rinse (Regular Cycle); Controlled Cold - Fisher & Paykel WA42T26GW1 Guide D'installation Et D'utilisation

End of cycle beeps

The beeps signaling the end of the cycle can be
increased or decreased.
Enter the Option Adjustment Mode.
1
Use the WASH OPTION button to select the number
2
of beeps you prefer.
Press POWER to store your selection.
3

Default rinse option

The normal rinse on the REGULAR and HEAVY DUTY
cycles is a SPRAY RINSE. When you select SOFTENER/
BLEACH RINSE on these cycles the rinse changes to
the default rinse. The default rinse is the rinse option
used on the DELICATE and PERMANENT PRESS
cycles. The default rinse is a SPRAY RINSE followed
by a DEEP RINSE. However, you can change the
default rinse to two deep rinses (as is used on the
ALLERGY cycle).
Enter the Option Adjustment Mode.
1
Use the SPIN SPEED buttons to select the rinse option you prefer.
2
Press POWER to store your selection.
3
Volume of water used in the spray rinse (REGULAR cycle)
You can increase or decrease the volume of water
added during the rinse on the REGULAR cycle.
Enter the Option Adjustment Mode.
1
Use the WATER LEVEL buttons to select the volume
2
of water you wish to be used in the spray rinse.
Press POWER to store your selection.
3

Controlled cold

Ecosmart™ is designed for installations that have
both hot and cold water. To ensure optimum
performance even in very cold weather, the cold
water temperature is controlled to 60˚F (15.6˚C).
However, if for some reason you do not have
hot water available you may need to change to
uncontrolled cold in very cold weather.
Ecosmart™ leaves the factory with the CONTROLLED COLD Option set. You can change this by
entering the Option Adjustment mode and by pressing the ADVANCE button once.
Changing pre-set options
Number of beeps
Light on
TIME SAVER
SOAK
SOFTENER/
BLEACH RINSE
Rinse option
Light on
MED spin
SLOW spin
HOLD
Spray rinse volume
Light on
HIGH
MED
LOW
Controlled cold options
Light color
Green
Amber
= 15 beeps
= 5 beeps
= no beeps
1st rinse 2nd rinse
deep deep
rinse rinse
– –
spray deep
rinse rinse
= more water
= more water
= FACTORY SETTING
= controlled cold
= uncontrolled cold
US
27
CA