Fisher & Paykel WA42T26GW1 Guide D'installation Et D'utilisation page 21

Spin hold
Use the SPIN HOLD option to:
Remove drip dry garments from a mixed load before the
■ ■
wash goes into spin.
Minimize wrinkling that is caused when clothes are left sitting
■ ■
in the machine at the end of the cycle.
When SPIN HOLD is selected, your Ecosmart™ will pause at
the end of rinse, beep and the spin light will flash to tell you
that it is waiting for another instruction. Press START/PAUSE
to begin the spin.
Delay start
DELAY START will delay the start of the wash cycle for 1, 3 or
9 hours.
Press DELAY START once for a delay of 1 hour. Press again
for 3 hours, a third time for 9 hours (and again to return
to normal).
Once you press DELAY START your
■ ■
delay period, you do not have to press START/PAUSE.
Be careful if using DELAY START for non-colorfast clothes as
■ ■
dyes may run if the clothes are damp.
Your Ecosmart™ will not beep at the end of the cycle if DELAY
■ ■
START is selected.
Clothes care safeguards
To avoid accidentally damaging your clothes, there are a few options that your Ecosmart™ will
not accept. For example, you cannot select a hot wash on the DELICATE cycle.
Wash cycles and options
Ecosmart™ will begin the
Fig.24 Selecting the
SPIN HOLD option
Fig.25 Selecting 1 hour
DELAY START option
US
19
CA