Safety Precautions - RCF RDNET CONTROL 2 Manuel De L'utilisateur

Before connecting and using this product, please read this instruction
manual carefully and keep it on hand for future reference. The manual is
to be considered an integral part of this product and must accompany
it when it changes ownership as a reference for correct installation and
use as well as for the safety precautions. RCF S.p.A. will not assume any
responsibility for the incorrect installation and / or use of this product.
WARNING: To prevent the risk of fire or electric shock, never expose
this product to rain or humidity.

1. SAFETY PRECAUTIONS

All the precautions, in particular the safety ones, must be read with
special attention, as they provide important information.
2. POWER SUPPLY FROM MAINS (direct connection)
a. The mains voltage is sufficiently high to involve a risk of electrocution;
therefore, never install or connect this product when its power cable
is plugged in.
b. Before powering up, make sure that all the connections have been
made correctly and the voltage of your mains corresponds to the
voltage shown on the rating plate on the unit, if not, please contact
your RCF dealer.
c. The metallic parts of the unit are earthed by means of the power
cable.
d. Protect the power cable from damage.
e. To prevent the risk of electric shock, never open the product: there
are no parts inside that the user needs to access.
3. Make sure that no objects or liquids can get into this product, as
this may cause a short circuit. This apparatus shall not be exposed to
dripping or splashing. No objects filled with liquid, such as vases, shall
be placed on this apparatus. No naked sources (such as lighted candles)
should be placed on this apparatus.
4. Never attempt to carry out any operations, modifications or repairs
that are not expressly described in this manual. Contact your authorized
service centre or qualified personnel should any of the following
occur:
-
The product does not function (or functions in an anomalous way).
-
The power supply cable has been damaged.
-
Objects or liquids have got in the unit.
-
The product has been subject to a heavy impact.
SAFETY
PRECAUTIONS
IMPORTANT NOTES
WARNING
3