Playing Other Sources; Selecting The Multichannel Analog Inputs; Using The Sleep Timer - Pioneer VSX-415 Mode D'emploi

05 Listening to your system

Playing other sources

RECEIVER
DVD/LD
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
3 Select the source you want to playback.
Use the input select buttons (INPUT
SELECTOR).
4 Start playback of the component you
selected in step 1.
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to this
receiver (page 14), you must select the analog
multichannel inputs for surround sound play-
1
back.
RECEIVER
DVD/LD
STANDARD
TOP MENU
Note
1 • When playback from the multichannel inputs is selected, you can't use INPUT ATT, TONE, DIALOG E, VSB and MIDNIGHT/
LOUDNESS, as well as the STANDARD, ADVANCED SURROUND, STEREO/DIRECT and the AUTO SURR. sound modes.
• When playback from the multichannel inputs is selected, only the volume and channel levels can be set.
36
En
SLEEP FL DIMMER INPUT ATT
INPUT SELECTOR
DVD 5.1CH TV/SAT DVR/VCR
CD-R/
CD TAPE/MD FM AM
ADVANCED MIDNIGHT/
SLEEP FL DIMMER INPUT ATT
INPUT SELECTOR
DVD 5.1CH TV/SAT DVR/VCR
CD-R/
CD TAPE/MD FM AM
ADVANCED MIDNIGHT/
SURROUND STEREO LOUDNESS
MENU
1 Press DVD 5.1 CH on the remote control
or DVD 5.1 on the front panel.
To cancel playback from the multichannel
inputs, use the INPUT SELECTOR buttons to
select a different input signal.

Using the sleep timer

The sleep timer switches the receiver into
standby after a specified amount of time so you
can fall asleep without worrying about the
receiver being left on all night. Use the remote
control to set the sleep timer.
RECEIVER
SLEEP
INPUT SELECTOR
• Press SLEEP repeatedly to set the sleep
time.
90 min
Off
Tip
• You can check the remaining sleep time at
any time by pressing SLEEP once. Pressing
repeatedly will cycle through the sleep
options again.
• You can also switch off the sleep timer
simply by switching off the receiver.
FL DIMMER INPUT ATT
60 min
30 min