ZUCCHETTI Lizard M Serie Manuel D'utilisation page 90

ROBOT CONTROLS DESCRIPTION
The figure shows the control position on
machine board.
A) Display: shows all functions.
B) ON: press to turn on the lawn mower.
C) PAUSE: press to stop the lawn
mower, the display is in "stand-by"; it
is now possible to program the lawn
mower. When pressed again, the
lawn mower resumes working. If the
key is pressed
recharging, the lawn mower does not
resume working until the key is
GB
pressed
disappears from the display.
D) CHARGE: press to bring the lawn
mower back to the base and
recharge the battery in advance. If
the key is pressed while the lawn
mower is recharging, recharging is
interrupted and the lawn mower
resumes working.
Key "Enter" (G)
during battery
again and 'Pause'
display (A)
Key "-" (H)
E) OFF/STOP: press to stop the lawn
mower; the display turns off.
F) Key "+": when working, press to
restart the previously stopped blade.
When
increase the items indicated by the
menu.
G) ENTER: when working, press to start
the spiral
programming press to confirm and
save the selection performed.
H) Key "-": when working, press to stop
the blade. When programming press
to decrease items indicated by the
menu.
Key "+" (F)
- 30 -
programming press
function.
Key "ON" (B)
Key "Start/Pause" (C)
Key "Charge" (D)
Key "Off/Stop" (E)
IDM - 41501703500.tif
User's manual
to
When