Use And Functioning - ZUCCHETTI Lizard M Serie Manuel D'utilisation

RAIN SENSOR ADJUSTMENT
1-Stop the robot in safety condi-
tions (see "Robot safety stop").
2-Adjust the distance between
the pins (A-B) via rotation of
the pin (A).
Important
The sensitivity of the sensor in-
creases with a decrease in the
distance between the pins. We
recommend not bringing the
pins. too close together
When the sensor detects rain
conditions, the robot carries out
its functions as programmed (see
"Programming mode").
RECOMMENDATIONS FOR USE
Important
When using the robot for the first
time, it is recommended to carefully
read the whole manual and to be sure
to have it completely understood, in
particular all the information relating
to safety.

USE AND FUNCTIONING

Use the equipment only for the tasks
authorised by the manufacturer and do
not tamper with any device to achieve
a different performance from the oper-
ating one.
- 29 -
pin (B)
eccentric pin
(A)
GB
IDM - 41501710400.tif
User's manual