Installation And Operation; Unpacking; Selecting Installation Position - INFOSEC UPS SYSTEM E6 LCD 1000 RT Manuel Utilisateur

Installation and Operation

4.
Read the Safety Instruction guide (page 28) before installing the UPS

4-1 Unpacking

Inspect the UPS upon receipt. The manufacturer designed robust packaging for your
product. However, accidents and damage may occur during shipment. Notify the
forwarder and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Remove the UPS from the carton box.
Check the package contents. Standard content shall includes：
 1 set of User's Manual
 2 pcs of IEC output cables (for UPS with IEC sockets only)
 1 pc of detached AC Input Power Cord (for UPS with IEC sockets only)
 1 set of UPS communication software with RS232 cable
 1 set of Tower/Rack Accessories Kit as below:

4-2 Selecting Installation Position

The UPS is heavy. Select a location sturdy enough to handle the UPS weight.
To ensure proper operation and long operating life, always position the UPS according to
the following requirement：
1. Keep minimum 20cm (8 inches) distance clearance from the rear panel of the UPS
to avoid any obstructions.
2. Do not block the air-flow to the ventilation louvers of the unit.
3. Please ensure the installation site is free from excessive dust and the ambient
temperature and humidity should be within the specified limits.
4. Do not place the UPS in a dusty or corrosive environment or near any flammable
objects.
5. This UPS is not designed for outdoor use.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 11 AA 68 203 03
38