Speaker Setup For Mcs-Fs232 - Pioneer MCS-838 Mode D'emploi

Speaker setup for MCS-FS232

Preparing the speakers
For front speakers:
Assembling the speaker stands and securing
your front speakers.
For vertical installation
1. Use the supplied adhesive to attach 4 small
pads to the speaker stand base.
2. Insert the large pole from the holes behind
the base and secure with the 4 screws.
3. Pass the speaker wire through the hole on
the pole.
4. Secure the speaker and the pole with 2
Non-skid pads
For horizontal installation
1. Use the supplied adhesive to attach 4 small
2. Insert the small pole from the holes behind
screws. Ensure that the speaker wire does
not get pinched between the speaker and
the pole.
pads to the speaker stand base.
the base and secure with the 4 screws.
Connecting 29
En
2
Non-skid pads