Setting Up A Combo Unit - Universal Electronics ATLAS OCAP Guide D'utilisation

Atlas OCAP M1056.fm Page 11 Tuesday, March 24, 2009 4:45 PM
5. Repeat steps 1 through 4 for each device you
want the remote control to operate. For future
reference, write down each working device
code in the boxes on the following page.
VCR Code
Device Type:___________________
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
CBL Code
Device Type:___________________
TV Code
Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/VCR Combo or a
TV/DVD Combo, you need to follow special steps to set
it up. Perform the following instructions to control
combo device:
1. For a TV/VCR Combo, turn on your TV/VCR
Combo and insert a video cassette. (For a TV/
DVD Combo, insert a DVD).
2. On the remote control, press VCR once; it will
blink once. Then press and hold SETUP until
the VCR key blinks twice.
3. Use the "Manufacturer's Codes (Codes des
manufacturiers)" starting on page 54 to locate
the brand name and enter the first four-digit
www.urcsupport.com/atlasocap
11