Electromagnetic Fields (Emf); Using The Appliance; Usage Restrictions - Philips FC6409/01 Mode D'emploi

- Do not mix different types of liquid floor cleaner. When you have used one liquid floor cleaner, first
empty and rinse the water tank before you add another liquid floor cleaner to the water in the
water tank.
- To prevent damage, never put ethereal oils or similar substances in the water tank or let the
appliance pick them up.
- To prevent damage, never put wax, oil, floor maintenance products or liquid floor cleaners that are
not water-dilutable in the water tank.
- To prevent damage, do not use liquid floor cleaners that are not transparent or even milky.
- Never exceed the maximum quantities mentioned on the bottle when you use a liquid floor
cleaner. Do not add more than a few drops to the water in the water tank, as this tank has a
capacity of 200 ml.
- Do not lift or tilt the nozzle when the water tank is assembled and full, as water may spray out of
the water tank.
- Do not clean the metal wetting strip with a sharp object, as this may damage the strip. Only clean
the wetting strip by rinsing it under the tap. Replace the wetting strip when you can no longer clean
it.
- Replace the wetting strip only with an original strip. For ordering a new strip, see chapter 'Ordering
accessories'.
- Clean the water tank according to the instructions. The water tank is not dishwasher-proof.
- Always use the vacuum cleaner with the filter unit assembled.
- Make sure that the appliance is installed with the wall fixture mounted to the wall according to the
instructions in the user manual.
- Be careful when you drill holes in the wall to attach the wall fixture, to avoid the risk of electric
shock.
- Maximum noise level: Lc = 85 dB(A)

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.

Using the appliance

Usage restrictions

- Only use the water tank on hard floors with a water-resistant top coat (such as linoleum, enameled
tiles and varnished parquet) and stone floors (such as marble). If your floor has not been treated to
make it water-resistant, check with the manufacturer if you can use water to clean it. Do not use
the water tank on hard floors of which the water-resistant top coat is damaged.
- Only use the water tank on linoleum floors that are properly affixed to prevent linoleum from being
drawn into the mopping nozzle.
- Do not use the water tank to clean carpets.
- Do not move the appliance with water tank assembled sideways, as this leaves water traces. Only
move forwards and backwards.
Note: The operating time depends on the power level used during cleaning.
Mopping pad and wetting strip (FC6404-FC6409)
FC6408, FC6405, FC6404 come with one wetting strip and two identical microfiber mopping pads.
FC6409 comes with two wetting strips and two different microfiber mopping pads.
English
7