Transport And Storage - RK Rose+Krieger Multilift I Notice De Montage

Colonne télescopique
Masquer les pouces Voir aussi pour Multilift I:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Transport and storage

4
Transport and storage
Transport inspection
Transport
Original packaging
Storage
98
NOTICE!
Damaged lifting columns must not be commissi-
oned!
Immediately check the delivery upon receipt to ensure that it is
complete and free from transport damage. Report the extent of the
damage to the person responsible and to RK Rose+Krieger GmbH
immediately.
WARNING!
Risk of injury due to improper transport!
Loads can swing out, topple over and fall down during
lifting operations. This can cause severe injuries.
Never step under or into the pivoting range of sus-
pended loads.
Only use approved lifting gear and load suspen-
sion devices with a sufficient load-bearing capacity.
Be aware of the lifting column's centre of gravity.
Wear an industrial hard hat.
Only transport the lifting column in the supplied original
packaging.
Store lifting columns in the following conditions:
n
Only place it on a load-bearing substrate.
n
Avoid any contact with solvent-based paints.
Do not expose to air containing oil.
n
Storage temperature: -20 - 60°C
n
Air pressure: 700 - 1060 hPa
n
Humidity: 30 - 85%
n
Temperatures below the dew point are not permitted.
n
Deviating environmental conditions must be approved
by RK Rose+Krieger GmbH.
Lifting column Multilift I/Multilift II
20.02.2019

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Multilift ii

Table des Matières