Installation Details - Burda PEFRECTCLIME RELAX DARK IRC IP55 Notice D'installation Et D'utilisation

INSTALLATION DETAILS:

1. Drill four holes in the wall
as shown below.
2. Fix the two supports to
the wallt using dowels of
appropriate size. The dowels
should be able to hold at
least 5 times the radiant
heater.
3. Make sure that the wall to
which the device is supposed
to be attached is stable and
there are no power lines or
water pipes.
Instructions
The heater must not
be directed towards
the ceiling or flammable
materials.
The device must not be
mounted into the ceiling.
You must leave enough
space around the top of
the unit to ensure good
ventilation.
After the heater has
been switched on, wait
15-20 minutes for the
heater to reach the
maximum temperature.
The ideal mounting posi-
tion is directly above the
area to be heated with a
longitudinal orientation
and directed vertically
downwards.
Insert the arch shaped
support in the special
rail on the upper side of
the device.
Align the holes of the
supports and join them
together using the sup-
plied bolts, setting the
desired inclination.
Provided wall/ceiling support:
The support
to be fixed
to the wall pres-
ents a series of
holes that allow
to fix the heater in different
positions.
GB