Skil PWRCORE 12 IW6744A-00 Guide D'utilisation page 15

Removable Belt Clip (Fig. 7)
Your tool is equipped with a removable belt clip
that can be positioned on the left side of the
tool for convenient transport.
To install the belt clip onto the tool:
a. Remove the battery pack from the tool.
b. Align the rib of the belt clip with the threaded
hole on the base of the tool.
c. Insert the screw and securely tighten the
screw with a screwdriver (not included).
To remove the belt clip from the tool:
d. Remove the battery pack from the tool.
e. Use a screwdriver (not included) to loosen
the screw that attaches the belt clip to the impact wrench.
f. Remove the screw and the belt clip.
Bit Storage and Strap Fixing
(Fig. 8)
Your tool features an integrated bit holder on
the back of the tool base to conveniently store
a hex bit. There's also a strap fixing area next
to the bit holder to attach a wrist strap.
Fig. 7
Fig. 8
Bit Sorage Area
Strap Fixing Area
15