Battery Kit Assembly (Option) - PowerWalker VFI 1000RM LCD Manuel D'usage

2.5 Battery kit assembly (option)

NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select
correct battery kit procedure below to assemble it.
2-battery kit
Step 1: Remove adhesive tapes.
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells.
3-battery kit
Step 1: Remove adhesive tapes.
Tapes
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells as below chart.
Step 2: Connect all battery terminals by
following below chart.
Step 4: Cover the other side of plastic shell as
below chart. Then, battery kit is assembly well.
Step 2: Connect all battery terminals by
following below chart.
Step 4: Cover the other side of plastic shell as
below chart. Then, battery kit is assembly well.
8
EN