Remote Control - Sony TA-ZH1ES Manuel D'instructions

Remote Control

  (power) button
Turns the amplifier on/off.
 INPUT button
Select the equipment of the music
source by pressing this button
repeatedly. The selected input name
appears in the display window
(page 19).
 DSD REMASTERING button
Turns the DSD Remastering function on/
off. The DSD RE. indicator lights while
the DSD Remastering function works.
For details about the DSD Remastering
function, see "Menu Item List" (page
28).
8
GB
 DIMMER button
Adjusts the brightness of the display
window.
Each time you press the button, the
brightness of the display window
changes as follows:
Bright  Dark  Off  Bright ...
When the display window is turned off,
the indicators on the front panel of the
amplifier are turned off.
 VOLUME +/– buttons
Adjusts the volume level.
 MUTING button
Turns off the sound temporarily. While
muting is on, [MUTING] appears in the
display window.
Muting is canceled by pressing this
button again or increasing the volume
level with VOLUME + on the remote
control.
 DISPLAY button
Changes the display in the display
window while playing. You can select
the normal playback display [NORMAL]
or input/output signal display
[FORMAT]. For details about the display
while playing, see "Changing the Display
Window" (page 26).
 OUTPUT button
Select the headphone jack or PRE OUT
L/R jacks for output by pressing this
button repeatedly. The selected output
name appears in the display window
(page 19).
When selecting the PRE OUT L/R jacks
for output, see "Connecting the Audio
Output Jacks (PRE OUT) without Using
the Headphone Jack" (page 17).
 DSEE HX button
Turns the DSEE HX function on/off.
When you turn the DSEE HX on by
pressing the button, the [DSEE HX]
setting that is set in the menu is recalled.
The DSEE HX indicator lights while the