Sony TA-ZH1ES Manuel D'instructions page 28

Menu Item List
You can set the following items on the menu.
The default settings are underlined.
Setting items
[DSEE HX]
Upscales compressed or CD quality sound
source to near hi-resolution sound quality.
You can also turn the DSEE HX function on/
off by pressing DSEE HX on the remote
control. When you set to on, the setting that is
selected on this menu is recalled.
The DSEE HX function works with the
following PCM signals.
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz,
352.8 kHz, 384 kHz
[DSD REMASTERING]
Converts all PCM signals to DSD signals of 11.2
MHz or 12.2 MHz.
This setting works in the same way as pressing
DSD REMASTERING on the remote control.
[D.C.PHASE LINEARIZER]
Lets you approximate the low frequency
phase characteristics to a traditional analog
amplifier.
[DIMMER]
Changes the brightness of the display window
and turns the indicators on/off .
[DISPLAY]
Changes the display in the display window
while playing.
This setting works in the same way as pressing
DISPLAY on the remote control.
28
GB
Bit depth
16 bit, 24 bit, 32 bit
16 bit, 24 bit
Setting value
[OFF]: Off
•
[STANDARD]: Standard mode
•
[FEMALE VOCAL]: Suitable mode for female
•
vocal
[MALE VOCAL]: Suitable mode for male
•
vocal
[PERCUSSION]: Suitable mode for the
•
percussive source
[STRINGS]: Suitable mode for the strings
•
source
[OFF]: Off
•
[ON]: On
•
[OFF]: Off
•
[ON]: On
•
[BRIGHT]: The display window and
•
indicators are bright.
[DARK]: The display window is dim.
•
[DISPLAY OFF]: The display window and
•
indicators are turned off.
Notes
The  (power) indicator does not turn off
•
regardless of this setting.
The display window lights brightly while operating
•
the amplifier or remote control regardless of this
setting.
[NORMAL]: Normal playback display (input
•
name, input signal, volume level)
[FORMAT]: Input/output signal display
•
(format, sampling frequency, and bit depth
of the input/output signal)