Baier BDN 511 Traduction De La Version Originale Du Mode D'emploi page 25

Imprint
Version: V01 / 2019-05
Copyright:
Maschinenfabrik
OTTO BAIER GmbH
Heckenwiesen 26
71679 Asperg
Germany
It is prohibited to forward or reproduce this
document or to exploit and disclose its contents,
unless expressly permitted. Any infringements will
result in liability to pay compensation for damages.
All rights reserved in case of patent, utility model or
design registration.
This instruction manual has been prepared with
the greatest possible care. Nonetheless, OTTO
BAIER GmbH does not accept any liability
whatsoever for possible errors in this instruction
manual and their consequences. Equally, no liability
whatsoever is accepted for direct or consequential
damage or losses resulting from improper use of the
machine.
The national health and safety regulations and the
requirements of this instruction manual are to be
observed when using the machine.
All product names and brand names used are the
property of the holder and are not explicitly marked
as such.
Subject to change without notice.
Contents
1 About this instruction manual ........... 26
1.1 Important information ............................. 26
1.2 Symbols used in the instruction manual 26
2 Safety Instructions .............................. 26
2.1 Workplace safety .................................... 27
2.2 Electrical safety ...................................... 27
2.3 Safety of people ...................................... 27
2.4 Using and handling the power tool ......... 28
2.5 Service .................................................... 28
2.6 Machine-Specific Safety Instructions .... 28
2.6.1 Operating personnel requirements ........ 28
2.6.2 Workplace safety .................................... 28
2.6.3 Electrical safety ...................................... 29
2.6.4 Safety of people ...................................... 29
2.6.5 Hazards when using and handling the
power tool ............................................... 30
2.6.6 Service / Maintenance / Repair .............. 32
2.6.7 Explanation of the pictograms on the
diamond channel cutter .......................... 33
12 Technical Characteristics ................... 34
12.1 Technical specifications ......................... 34
2.7 EU Declaration of Conformity ................ 35
2.8 Machine characteristics ......................... 35
2.9 Machine parts and controls .................... 35
2.10 Intended use ........................................... 35
3 Before Starting Work ........................... 36
4 Operation and Control ......................... 36
4.1 Fit or replace diamond
dry-cutting discs ..................................... 36
4.2 Adjust cutting depth ................................ 38
4.3 Connect dust extractor ........................... 38
4.4 Switch on the diamond cutter and cut .... 38
4.5 Finish cutting process ............................ 39
5 Cleaning ................................................. 39
6 Maintenance .......................................... 39
6.1 Replacing the dust deflector .................. 39
7 Recommended uses for BAIER diamond
dry-cutting discs .................................. 40
8 Handling Diamond
Dry-cutting Discs ................................. 40
9 Tools and Accessories ........................ 40
10 Disposal ................................................. 40
11 Scope of Supply ................................... 41
13 Warranty ................................................ 42
| 25 |