Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
1
About this instruction
manual
This instruction manual contains all important infor-
mation necessary for safe handling of the diamond
cutter.
The diamond cutter is also referred to as the "tool"
or "machine" in this instruction manual.
Figure references
References to figures, which are located at the
beginning of the instruction manual are displayed in
the text with this symbol
reference is to Figure number 1).
1.1
Important information
Read the instruction manual
Before starting any work with or on the tool, this
instruction manual, the safety instructions and
the warnings must be read through carefully and
observed.
Always keep this instruction manual together
with the equipment.
An approved half-mask with filter must
be worn!
1.2
Symbols used in the instruction
manual
DANGER
"DANGER" indicates an imminent hazard, which
will result in immediate death or severe physical
injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
WARNING
"WARNING" indicates an imminent hazard, which
could result in death or severe physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
| 26 |
1
(here, for example, the
CAUTION
"CAUTION" indicates an imminent hazard, which
can result in minor or moderate physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
NOTE
"NOTE" indicates possible property damage, gives
use recommendations and helpful tips.
2
Safety Instructions
WARNING
Read all the safety instructions and precautions.
Failure to observe the safety instructions and
precautions can cause serious injuries.
Keep all safety instructions and precautions
for future reference.
The term "power tool" used in the safety instruc-
tions refers to mains-operated power tools (with
mains power lead) and battery-operated power
tools (without mains power cable).
Publicité
Chapitres
Table des Matières
