SOUNDMASTER Highline DAB100 Mode D'emploi page 12

LOCATION OF CONTROLS AND INDICATORS
Diagram of Back and Front Panel.
FRONT PANEL
1. LCD DISPLAY
- Full dot matrix LCD display with black backlight.
2. INFO/SCAN
- (DAB) Long press and hold the "INFO/SCAN" button for 2 seconds to scan full all the DAB
ensembles
- (FM) Long press and hold the "INFO/SCAN" button for 2 seconds to scan the FM band
and stops once a station is detected.
- (DAB / FM information) Press and release "INFO/SCAN" to cycle through the DAB / FM
information, which shown on the bottom of the display e.g. scrolling text / time and date /
program type.
3. MODE
- Press "MODE" button to switch between DAB, FM and Aux Input.
4. STANDBY
- Press "STANDBY" button, the unit will be turned ON to the last mode.
- Press this "STANDBY" again to standby the unit.
- Long press and hold to turn off the unit.
- Press and release "STANDBY" to turn on the unit.
5. MENU
- Press and release "MENU" button to cycle through the different setup options, press
"SELECT" to select an option.
6. ALARM
- Press "ALARM" button to show the current Alarm setting.
- Long press "ALARM", "UP" / "DOWN" and then "SELECT" to setup the alarm time, alarm
volume level and wake up source.
7. UP & DOWN
- Press "UP" / "DOWN" button to view the current menu selection
(DAB mode) - Press "MENU" button to cycle through the Clock Set, Sleep Set, Full
Scan and Time Update options.
- Long Press and release "MENU" button to cycle through the DAB
setting mode, it including the Manual Tune, System Reset, Software
version number.
(FM mode) - Press and release "MENU" button to cycle through the FM setting
mode, it including the Clock Set, Sleep Set and Time Update options.
- Long press and release "MENU" button to cycle through the setting
mode, it including the System Reset and Software version number.
ENG 1
DAB100 / English Manual