Setting The Sleep Timer - SOUNDMASTER Highline DAB100 Mode D'emploi

DAB DISPLAY MODE
DAB display mode allows you to view different information of the broadcast data. The second line of text on the
LCD display will show any one of the followings six information:
Press 'INFO/SCAN' button and cycle through the information displayed on the bottom line of the LCD display.
Ensemble name: The name of the ensemble (Channel number) in which the current service is found.
Time and Date: The time and Date obtained from the current multiplex, this will be updated in every
minute approximately
Bit-rate & the audio status: The bit rate (kbps) and the audio status (Mono or Stereo) of the current
service.
DLS: Scrolling text accompanying the audio, where available, from the service provider. The text will be
continually scrolled along the bottom line. This text may include current song playing, text numbers for
competitions, etc.
Program type: A description of the type of the content being broadcast by the service, e.g. 'Pop music'
Signal Strength: The signal strength of the current ensemble
BBC
BBC Ensemble
BBC
SOFTWARE VERSION
Long press 'MENU' and cycle through it until the software version number is
displayed.
The LCD screen will show the version of software that has been used in this unit.
Note: Update for the software is not available in this unit.
To exit from the menus at any times, press the
'MENU' button again, or simply leave all controls
untouched for a few seconds.
CHOOSING A CLOCK MENU
The first time switch on the unit, the clock will be automatically set from the transmitted
with the DAB radio signal.
Alternatively, you can set the clock to show a time different from the local time zone.
Or, you need to set the clock manually when no DAB signal.
To set the Clock, go into the clock setting menu by following:
Press 'MENU' button to choose Clock Set, then press 'SELECT' button
The LCD display will show the hour
Press 'UP'/'DOWN' button to choose the HOUR display format
press 'SELECT' button
The LCD display will show the
Press 'UP'/'DOWN' button to set HOUR, then press 'SELECT' button
The LCD display will show the
Press 'UP'/'DOWN' button to set MINUTE, then press 'SELECT' button
To show the new time and date, press the "STANDBY' button.

SETTING the SLEEP TIMER

The sleep timer switches your radio into standby after a number of minutes.
To set/change the sleep timer
Press 'MENU' button to cycle through the SLEEP SET setting and press 'SELECT'
The LCD display will show Sleep, and the
Press 'UP'/'DOWN' button and press 'SELECT' to set the MINUTE
It has OFF / 15minute / 30 minute / 45 minute / 60 minute for selection
The LCD display will show the
To cancel the sleep timer, enter into the SLEEP SET again and 'UP'/'DOWN' button to
BBC
12:30 01/01/2009
BBC
Pop Classic
"24H"
is flashing
"00"
is flashing
"00"
is flashing
"30"
Min is flashing
"S"
after the sleep timer is set
ENG 5
DAB100 / English Manual
BBC
Stereo 128kbPS
BBC
BBC Music
Customer vBI 1.7
"12" "24"
H or H, then
BBC
Clock Set
Clock Setting
24H 00:00
Clock Setting
24H 00:00
Clock Setting
24H 00:00
BBC
Sleep Set
Sleep
30Min
BBC s BBC
Ensemble