Ameriphone Q90D Mode D'emploi page 25

Programming
Flasher
Factory setting is [ON]
The Flasher consists of two lights that flash
when the telephone rings.The brightest light
(white light which is located on the left), does
not operate when the Q90D is powered by
batteries.
1. Press the Spacebar to turn the Ring Flasher
to the ON or OFF position.
2. Press ESC to finish, or press Return to
continue to International (speed).
International (Speed)
Factory setting is [OFF]
In the United States, text messages are sent at
the speed described as 45 Baud. Some other
countries use 50 Baud.While the Q90D can
be set to operate at this International speed,
it automatically receives either speed. If you
are sending a message to someone in another
country and they have problems receiving
your message, you may want to try changing
the transmission speed of the Q90D as
follows:
1. Press Spacebar to turn the International
mode ON or OFF.
2. Press ESC to finish, or press Return to
continue to Form Feed.
Form Feed
Factory setting is [OFF]
When the Q90D is connected to an
Ameriphone Portable Printer, your TTY can be
set up to send a signal to let the Printer know
when to move to the next page.
1. Press the Spacebar to turn Form Feed ON
or OFF.
2. Press ESC to finish, or press Return to
continue to Auto Return.
Auto Return
Factory setting is [ON]
Auto Return places carriage returns in the
proper locations of the printout so that text
moves to a new line each time a different
speaker's words are printing. Some printers
require this to retain proper formatting.This
does not change the way words appear on the
display of the Q90D.
1. Press Spacebar to turn Auto Return ON or
OFF.
2. Press ESC to finish, or press Return to
continue to Repeat Key.
Repeat Key
Factory setting is [ON]
When this function is ON and you hold down
a key, the Q90D repeats the key until you
release it.
1. Press Spacebar to turn Repeat Key ON or
OFF.
2. Press ESC to finish, or press Return to
continue to Mixed Case.
Mixed Case
Factory setting is [OFF]
When Mixed Case is ON, the messages you
are sending display in lower case text on your
screen and the messages you are receiving
appear in upper case text.This makes it easier
to follow the conversation.When Mixed Case
is OFF, all messages are in capital letters.
21