Primary Functions - Ameriphone Q90D Mode D'emploi

Functions

Primary Functions

You may easily activate the Q90D's Primary Functions by simply selecting and pressing any one
of its function buttons, ranging from F1 - F13.The following chart describes how the Q90D will
respond when a particular function button is activated.
Press
F1 - Dial
F2 - Redial
F3 - Quick #
F4 - VCO Req (Request)
F5 - MSG 1
F6 - MSG 2
F7 - Hi-SPEED
F8 -Save
F9 - HCO
F10 - Transf (Transfer/hold) places a call on hold before transferring it to another TTY or when you
F11 - Flash
F12 - Sticky
F13 - Menu
And the Q90D...
activates Dial mode allowing you to enter a name or telephone number
or scroll through the directory. Pressing F1 again or pressing ESC
cancels Dial mode.
redials the last number dialed.
dials the number stored in telephone directory space #1.You can use it for the
number you dial most frequently, such as your Relay Service.
releases a pre-programmed message,VCO CALL PLS GA, to request
Relay Service assistance with a VCO call. (Page 11)
allows you to send one of two programmed messages stored on F5 and F6.
(Page 19).
activates Hi-Speed, sending text at twice the normal speed so you can type
as fast as you want to for quicker, more economical calls.The Factory setting is
OFF. (Page 5)
saves MSG 1, MSG 2 or a telephone number while in Dial mode.When not in
Dial mode, pressing this key saves a conversation during a phone call.
turns Hearing Carry Over (HCO) mode ON and OFF (requires an optional
amplified speaker). (Page 11).
temporarily leave the Q90D during a conversation (Page 12).
activates subscribed telephone company features such as 3-way calling.
activates and deactivates the Sticky Keys mode for single-hand operation.
The Factory setting is OFF.
enters and exits Menu mode for reviewing and changing Q90D settings.
When it exits Menu mode, it returns to normal Q90D TTY operation.
14