Ameriphone Q90D Mode D'emploi page 10

Features
Spacebar Key. In addition to using this
P
key for space between words, it is used to
turn features ON and OFF when setting up
your Q90D.
Shift Key. The Shift key, when used with
Q
certain Function keys, causes the Q90D to
perform the Secondary Functions listed on
Page 15.
CTRL Key. The CTRL key, when used in
R
combination with certain Function keys,
causes the Q90D to perform the
Secondary Functions listed on Page 15.
Right Side:
LOCK. This safety feature is located on
1
the right side of the Q90D. LOCK ON
prevents the Q90D from accidentally
turning ON and draining the batteries.
Keep this in the ON position anytime you
move the Q90D from one location to
another. Slide the lever to LOCK OFF
before using your Q90D because it will
only operate in this position.
Back Side:
TO LINE Jack. This jack is used to
1
connect directly to the phone line.
TO PHONE Jack. This jack is used to
2
connect to a standard or amplified
telephone.
HCO SPEAKER Jack. This 3.5mm jack is
3
used when connecting speakers to the
Q90D.
Connector. This connector is used by the
4
factory to connect the Q90D to the
Ameriphone Acoustic Coupler (Q90DA
Combo) or Ameriphone Amplified Handset
(Q90DU Combo).
12VDC 500 MA Jack. This jack is for the
5
adapter that provides electric power to
your phone.
CELLULAR (2.5mm) Jack. This jack is
6
used for connecting your Q90D to a
cellular or mobile phone.
Bottom Side:
PRINTER PORT. A printer cable can be
1
attached to the printer port, which is
located on the bottom side of the Q90D.
Battery Compartment. This
2
compartment stores six (6) NiCAD
batteries. It is located on the bottom side
of the Q90D.
6