Placing A Call On Hold Or; Transferring A Call; Printing A Conversation; Connecting The Printer - Ameriphone Q90D Mode D'emploi

Installing and Using Your Q90D
2. Turn on your cell phone or cordless phone.
3. Press Power to turn on your Q90D.
4. Type your response.
5. When you are finished with the
conversation, turn OFF the cellular or
cordless telephone.
6. Turn OFF the Q90D by holding down
CTRL and pressing Power or CTRL and F1
to hang up.
Receiving Calls in Cell Phone
Standby Mode When Your Cell
Phone or Cordless Phone is
Already Connected to the Q90D
1. If you want CELL FLASH function to flash
on incoming cellular calls, set your Q90D
to Cell Phone Standby mode.
2. Plug the cellular telephone or cordless
phone into the Q90D, then hold down
CTRL and press F3.The display reads,
CELL PHONE STANDBY MODE.
3. Leave the Q90D in Standby mode until a
call comes in.When you receive a call, the
CELL FLASHER light flashes in red and the
Standby message turns off.Touching a key
will also turn OFF the Standby message.
A. Some cellular and cordless telephones
are designed so that the Q90D CELL
FLASHER does not flash when a call
comes in.
B. If your telephone functions like this,
watch the display on your telephone
to see if a call is coming in.
4. When the CELL FLASHER light flashes,
turn ON your cellular or cordless
telephone.
5. Press the Spacebar and start typing.
6. When you are finished with your
conversation, turn off the cellular or
cordless telephone.
7. Hold down CTRL and press F3 to return
to cell phone Standby mode or turn OFF
the Q90D by holding down CTRL and
pressing Power.
Placing a Call on Hold and

Transferring a Call

This feature can be used when you
temporarily leave the conversation. In
addition to letting another party know
he/she is on hold, it turns off the Microphone.
1. Press F10 to send the message, PLS HOLD.
Your Q90D sends the message and then
displays, HOLD MODE [ON] PRESS ANY
KEY TO RELEASE.
2. Turn on another TTY on the same
telephone line. Using the second TTY, press
the Return key three times and the Q90D
automatically hangs up and turns OFF. If
your other TTY does not have a Return
key, press Enter three times instead.You
can then continue your call on the other
TTY.

Printing a Conversation

You can print a conversation from your Q90D
using the Ameriphone Portable Printer.The
Q90D checks for the presence of a printer
before the Q90D is turned ON.

Connecting the Printer

1. Make sure the Q90D and the Printer are
OFF. If needed, hold down CTRL and press
Power to turn OFF the Q90D.
12