Ameriphone Q90D Mode D'emploi page 20

Functions
Hold Hold
down down
Ctrl
Ctrl
Ctrl
Ctrl
Ctrl
Ctrl
CTRL
Ctrl
Secondary Functions Using with Both the Shift and CTRL Keys
The following four (4) functions, which use three (3) keys, are listed on the keyboard above
the F11, F12, F13, and ESC keys with black lettering on a blue background.
Shift CTRL
Shift CTRL
Press Function
F8 Password saves a 10-digit Password which is necessary only if
you want to use the Remote Message Retrieval function.
F9 Turns Interrupt ON and OFF.When using the Q90, only one
person can type at a time.When turned ON and you are
sending, the Q90D will pause every 20 seconds to allow the
other TTY to interrupt your transmission.The Interrupt
function lets you ask the other person to stop typing.When
turned ON, this key briefly displays INTERRUPT! on the screen
and flashes the RING FLASHER to alert the person on the
other line to stop typing.
F10 This function does not apply to Q90D.
1 PLS HOLD sends the PLS HOLD message. If pressed when
OFF LINE, it causes the Q90D to go ON LINE.
Q Hello GA sends Hello GA message when answering a
telephone call. If pressed when OFF LINE, it causes the
Q90D to go ON LINE.
A (Smile) sends the (Smile) message. If pressed when OFF
LINE, it causes the Q90D to go ON LINE.
Z ..Ha Ha Ha. sends the ..Ha Ha Ha.. message when ON
LINE. If pressed when OFF LINE, it causes the Q90D to
go ON LINE.
B Transmits the entire conversation memory to another
TTY. Note:This function takes approximately one hour
to execute. Hi-Speed cuts the time in half.
F1 Deletes all directory names and telephone numbers. It
operates OFF LINE only.
F11 Resets the Q90D to factory default settings.This key
functions OFF LINE only.
16