Magic Vac P0116ED Instructions Sur Le Fonctionnement page 15

Mod. P0116ED MACHINE PART NAMES
(1) Engage/release buttons - Lateral engage buttons that allow the bag insertion area to be locked and
unlocked, allowing the packaging cycle to be carried out automatically and allowing the operator to
carry out other activities. In the closed position, they lock the lid while starting the vacuum cycle in
the bags, jars and containers.
(2) Control panel - To set the various functions of the machine (see paragraph: DESCRIPTION OF
CONTROLS AND FUNCTIONS).
(3) Air intake for the Tube (ACCESSORY PORT) - To insert the Tube to perform vacuum packing in all
canisters and with all MAGIC VAC
(4) Cover - Open in the upper fixed position, it allows for bags to be positioned before proceeding with
packing.
(5) Vacuum gauge (if provided)- Mechanically-operated analogue instrument indicating the vacuum
value obtained.
(6) Sealing bar - Heating element which seals the bag.
(7) Airtight gasket - Guarantees the vacuum in the chamber allowing for air to be evacuated from the
bags MAGIC VAC .
®
(8) Vacuum chamber - Is the location for positioning the bag and evacuating the air.
(9) Sealing gasket - Presses the bag on the Sealing Bar.
(10) Removable Tray - Solution that allows the Vacuum Chamber to be washed in the dishwasher for
maximum hygiene.
(11) Roll-Holder Compartment
(12) Bag Cutter - Can be used in both directions.
(13) Canister Tube - This connects the machine to all of the MAGIC VAC
(14) Power Cable - To connect the machine to power.
(15) Cable Compartment - Compartment for storing the Power Cable, located on the back of the machine.
(16) Accessory Compartment - Compartment for storing the Magic Cutter (where applicable) and the
Canister Connection Tube, located on the lower part of the machine.
DESCRIPTION OF CONTROLS AND FUNCTION
2L
2H
2B
2H
2C
2H
2D
accessories.
®
(2A) ON LED - When GREEN, it is activated with the
5
Engage buttons (1) engaged.
(2B) Auto Vacuum & Seal Button - Start button for the
automatic bag packing cycle, including final sealing.
(2C) Pulse button - Button to start the manual cycle; the
machine continues extracting air until the button is
released.
(2D) Canister Button - Start button for the automatic
cycle for canisters and MAGIC VAC
2I
(2E) Seal Button - Start button for manual Sealing.
(2F) SEAL LED - Flashing RED when Sealing.
(2G) CANCEL Button - Stops the machine at any time.
2A
2H) LED - When steady BLUE in the Vaccum & Seal,
Vacuum Pulse and Canister operating mode.
2G
(2I) Sealing Mode RED LEDs - indicate the sealing mode
selected.
2F
(2L) Sealing Mode Button - Selects from the 2 sealing
2E
modes.
(5) Vacuum gauge (if provided)- It indicates the vacuum
value obtained
12
accessories.
®
accessories.
®