Error Messages And Solutions - IBP TD 3213 Mode D'emploi

error messages and solutions

The following table explains possible error messages.
Display/Problem
Err.0
Err.1
Err.2
Err.3
Err.4
Err.5
Err.6
Err.7
Meaning
No pulse, or measured pulse is too
low.
The measuring cuff is leaking or
pressure buildup is too low.
The systolic value cannot be
determined.
The measuring cuff pressure is too high.
The diastolic value cannot be
determined or is outside the
measuring range.
Pressure buildup is taking place too quickly.
Pressure buildup is taking place too slowly.
The systolic value is outside the
measuring range.
general information 14
Solution
Make sure the measuring cuff is cor-
rectly applied and measure once again.
If changing the batteries does not help,
please ask your dealer for help.
Remain calm and measure once again.
Do not squash the measuring cuff.
Remain calm and measure once again.
Please ask your dealer for help.
Please ask your dealer for help.
Remain calm and measure once again.
31