Introduction; Preliminary Notes - IBP TD 3213 Mode D'emploi

1 introduction

dear customer,
we are delighted that you have decided to purchase this blood sugar/pressure measuring system. The
device measures your blood sugar with extremely high accuracy. It is fitted with an automatic memory for
350 measured values with date and time. This enables you to follow changes easily and tell your doctor
about them in good time. The system is intended for use by private persons for active blood sugar
checks. It is not suitable for the determination of diabetes or for the determination of blood sugar
values for newborn babies. When testing, use only fresh, capillary whole blood. This instruction
manual is for your information. Please read it carefully and completely, follow all instructions and carry out
all control tests as described before you actually carry out a blood sugar test. Keep this instruction manual
in a safe place.
Subject to technical alterations.

Preliminary notes!

This blood sugar measuring device conforms with the requirements of EU guideline 98/79, 93/42/EEC,
IEC 60601-1, IEC 61010-1, IEC 60601-1-2, IEC 61326, EN 1060-1, EN 1060-3, ANSI/AAMI SP 10,
ISO 15197, ISO 14971 for "in vitro" diagnostic devices and has been issued with the CE 0123" conformity
sign.
The ibp company confirms conformity with these requirements for the device
0123
supplied together with this instruction manual. The conformity declaration is available.
2