Table des Matières
Publicité
Checking the PLC
Connection
The station and the PLC module are preconfigured at the
factory to connect automatically.
12
After 30 seconds, check that the 3 LEDs of the PLC
module are all lit.
1 Power LED
2 Powerline LED - SOLID: The device is connected to your station.
3 Ethernet LED
*PLC : Power-line communication technology enables you to build a computer
network on your home's electrical network.
FLO Home X5 | Installation guide | flo.com | September 2018
The three lights lit up indicates
1
that the connection was
2
successful.
3
- SOLID: The device is receiving electrical power.
- BLINKING: The device is resetting, the simple connect
button was pressed or power saving mode was enabled.
- OFF: The device is not receiving electrical power.
- OFF: The device did not detect your station.
The colors (Green, Orange or Red) indicate a connection
between your station and the PLC module.
- SOLID : The Ethernet port is connected to your router.
- OFF : There is no Ethernet connection.
11
Publicité
Table des Matières
