Table des Matières
Publicité
Installing the Station
W
arNiNg
1
Disassemble the front housing by removing the 2
front screws and then separate the mounting plate
by unscrewing the lower screw.
Front housing
N
ote
The power supply cable can be
inserted from the rear (a) or
from under (b) the station:
- 3/4 knockout (a) and (b)
- Remove a single cap
- Strain relief not included
FLO Home X5 | Installation guide | flo.com | September 2018
Your station must be installed by a certified
electrician.
Front screws
Back housing
Lower screw
Mounting plate
a
b
7
Publicité
Table des Matières
