Basic Operations - SOUNDMASTER SRR70 Mode D'emploi

➢ If the device is operated with batteries and is in standby mode, the batteries will still be
discharged. To avoid this, we recommend removing the batteries or connecting the device
to the mains.
ERP power managment
The device automatically switches to standby after 15 minutes if there is no audio
signal. To turn the device on again, turn it off and then on again.
POWER ON / OFF
Switch the unit with the "FUNCTION SELECTOR" on and off (tape position).
SOURCE SELECTION
Select with the "FUNCTION SELECTOR" to one of the desired sources below:
• DAB/FM
• BT/USB/SD
• TAPE/OFF
ADJUSTING VOLUME
Rotate the "Volume control" knob clockwise or counterclockwise to increase or decrease the
volume.
ADJUSTING BASS
Turn the "Bass adjustment" knob clockwise or counterclockwise to increase or decrease the
bass tones.
Extend completely the telescopic antenna.
1. Set the "FUNCTION SELECTOR" to the DAB/FM position.
2. Press the "MODE" button repeatedly to select the DAB mode.
3. At the first start the unit will automatically start the scan function and search all available
stations.
4. During the scan the display will show "Scanning ........." together with a slide bar that
indicate the progress of the scan and the number of stations that have been found.
5. After the scan has finished, the unit will select the first alphanumerically found station.
6. To explore the found stations, rotate the "UP/DOWN /CONFIRMATION" knob to select the
desired radio station and press the "UP/DOWN /CONFIRMATION" knob to confirm the
selected station.
Note: If no stations are found after auto scan, press the "SCAN" button to perform a new
automatic station scan.

BASIC OPERATIONS

DAB
2
SRR70 / English Instruction Manual