Basic Operations - SOUNDMASTER UR2045 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Note:
➢ The automatic update function can takes about 3-10 minutes. If the signal is received, the
time will show on the display accordingly and the radio stations will be stored.
➢ If the automatic update system had been terminated by the user or the update fail, the date
and clock are defaulted to 0:00 and year 2019.
➢ The time of alarm 1 and alarm 2 are default to 00:00 and inactive.
➢ The unit is switched off
ERP power management
The unit will turn off automatically after 15 minutes in standby mode if there is no audio
signal. To turn on the unit again press the " / Mode" button.
POWER ON / OFF
Press the " / Mode" button to turn on the unit.
Press and hold " / Mode" button to turn off the unit in standby mode.
SELECTING MODES
During playing, press the " / Mode" button repeatedly to switch between the modes.
ADJUSTING VOLUME
Press the "Vol –" or "Vol +" button to decrease or increase the volume.
1. Turn the unit on and press the " / Mode" button repeatedly until "DAB" is shown in the
display.
2. If no station scan is done (e.g. the automatic update function was terminated) the unit will
start an automatic scan. The display show ">>>
show the found radio stations.
If you want to start an automatic scan, press and hold the "AMS" button. The display will
show ">>>
0" again and the unit will store all receivable radio station.
3. To listen a scanned radio station press the "
station. After a moment the unit plays the selected station.
Store a preset station
1. Select the desired radio station.
2. Press the "MEM" button and choose with the "
the radio station should be saved. You can store max. 20 radio stations!
3. Press and hold the "Enter" button until "MEM" disappear at the display and " PRESET
STORED" is shown.
Recall a preset station
1. Press the "MEM" button and select with the "
2. Press the "Enter" button to confirm the selection. The radio station will be played.
DAB Information
During DAB mode press the "Info" button repeatedly to show the following information:
Station name
Multiplex/frequency

BASIC OPERATIONS

Time
Date
Audio bit-rate
DAB
0", the ">" is moving and the number
" or "
" button and select the desired
" or "
" button the station number where
" or "
" button the desired station number.
Signal level
Song information
Error rate.
2
UR2045 / English Instruction Manual
Genre

Publicité

Table des Matières
loading

Table des Matières