Remote Controller - LGB TOY TRAIN 90202 Notice D'utilisation

6.2 Remote Controller

Unscrew the battery holder and lift up the
cover.
1
Insert two (2) type AAA/LR 03 batteries as
shown in the drawing.
2
Install or change the batteries only in
pairs according to the markings!
Pay attention to the polarity!
Put the cover for the battery holder back in
3
place.
Screw down the battery pack cover.
4
6.3 Locomotive
Remove the engineer's cab.
1
!
Please note!
The wire connections in the engineer's cab
cannot be undone.
11