Programming Espresso Thermoblock Temperature; Programming Steam Thermoblock Temperature - Krups XP6180 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PROGRAMMING ESPRESSO THERMOBLOCK TEMPERATURE

The water temperature of this unit has been calibrated to precise temperature of 197.6°F at the group
head. The temperature of the water at the group head can be modified in increments of 2°F up and
down should it be desired.
Press and hold on the "SINGLE ESPRESSO" button for 3 seconds. While still holding down the
"SINGLE ESPRESSO" button briefly press the "POWER" button and release.
NOTE: The light above the "SINGLE ESPRESSO" button will light up.
Release "SINGLE COFFEE" button.
NOTE: This light will remain on for up to 5 seconds before automatically returning to the factory setting if
no action is taken. The espresso machine will then power on and begin heating up.
Within 5 seconds, press and release one of the buttons below depending on the required temperature
adjustements:
NOTE: When you have selected a new temperature setting the light above the button pressed lights
up and flashes and the machine makes 2 beeps.
The espresso machine will then automatically power on and begin heating up.

PROGRAMMING STEAM THERMOBLOCK TEMPERATURE

The steam temperature of this unit has been calibrated to deliver a powerful and dry steam for frothing
milk. The temperature of the steam can be modified in increments of 3°F up and down should it be desired.
To do this you need to follow the instructions below:
Press and hold the "DOUBLE ESPRESSO" button for 3 seconds. While still holding down the
"DOUBLE ESPRESSO" button briefly press the "POWER" button and release.
NOTE: The light above the "DOUBLE ESPRESSO" button will light up.
Release "DOUBLE ESPRESSO" button.
NOTE: This light will remain on for up to 5 seconds before automatically returning to the factory setting if
no action is taken. The espresso machine will then power on and begin heating up.
Within 5 seconds, press and release one of the buttons below depending on the required temperature
adjustements:
+2°F = press the "DOUBLE ESPRESSO" button
+4°F = press the "PROGRAM" button
-2°F = press the "MANUAL" button
-4°F = press the "POWER" button
+3°F = press the "DOUBLE ESPRESSO" button
+3°F = press the "PROGRAM" button
-3°F = press the "MANUAL" button
-3°F = press the "POWER" button
English
17

Publicité

Table des Matières
loading

Table des Matières