Chauvet Professional EPIX TILE 2.0 Guide De Référence Rapide page 6

ÉPIX™ Tile 2.0 QRG
Mounting
The ÉPIX™ Tile 2.0 can be mounted at any orientation, individually or in combination
with other ÉPIX™ products. The ÉPIX™ Tile 2.0 has an adjustable mounting bracket
with 13 mm holes, which are suitable for a clamp. The housing has connection slots on
all four sides for connecting the tiles to each other and other ÉPIX™ products.
A single ÉPIX™ Tile 2.0 can hold only the following number of products attached with
the connectors and connection slots:
·
2 - ÉPIX™ Tile 2.0, or
·
1 - ÉPIX™ Bar 2.0, or
·
3 - ÉPIX™ Strip 2.0
When attaching multiple ÉPIX™ products with the connectors and connection slots,
link the safety cables so that each product is separately attached via safety cables to
the mounting structure. See
Each connection slot has a small round depression just in from the edge of the tile.
The connector lock knob twists a bolt into this depression to secure the tiles together.
The tile connector wing nut loosens and tightens the connector. Loosen it to slide the
connector into the connecting tile. Then tighten it in place after the connector is locked
into place with the lock knob.
·
Make sure the mounting structure or surface, and the mounting clamp, can
support the product's weight. See
·
Make sure the product and its cables are clear of people as well as all other
objects and cables.
·
Always use a safety cable.
Most video software customizes the output image to appear on the tiles in any
configuration so the tiles can be hung as needed and still display the image properly.
Mounting Diagram.
Dimensions And
6
Weight.
EN