LG TPNC488TLA1 Manuel D'utilisation page 21

Air Cleaner Operation Procedure(A/CL MODEL)
•
Air Cleaner Operation only
1
Press the A/CL Operation Start/Stop Button.
(Operation will start when the button is pressed, and stop when the button is pressed again.)
2
Select Fan speed.
The display shows low fan speed at the initial condition.
• You can operate the Plasma Air Purifying under the unit operation of cooling, heating, soft
dry or Auto mode.
2
• Air Cleaner Operation with Cooling or any other Operateion.
1. Press the Start/Stop Button.
2. Select the desired Operation Mode.
3. Press the Plasma Air Purifying Operation ON/OFF Button.
4. Set the fan speed.
A/CL
Each time the Fan Speed Button is
pressed, the Fan Speed mode is
shifted in the arrow direction.
Operating Instructions
Owner's Manual 21