Usage; Control Panel; Functions - Waterflex Fit's Pool Guide D'installation & D'utilisation

7.1. Control panel

Screen

7.2. Functions

once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius degrees to
Fahrenheit degrees.
Press the temperature adjustment buttons, then the screen will flash. When it is flashing,
you can set the desired temperature. The value will increase or decrease 1 degree at
once. The temperature could be set between 30°C to 42°C (86°F to 108°F).
Hold down the lock button 5 seconds to lock or unlock the control panel.
Lock the control panel when you are away to prevent other people come to change
your settings.
Press the massage button to activate the bubble massage system, the green indicator
light turns on. Pressing once will start the lowest speed (L-1 will display on the screen).
Press again to increase the speed to L-2 and press again to reach the highest speed L-3.
Hold down the massage button 5 seconds to turn off. When massage function turns off,
the heating function is back on.
42

7. USAgE

LED light Heater
Temperature
units indicator
Massage
Increase
temperature
Temperature
units selector
Lock
Decrease
temperature