Waterflex Fit's Pool Guide D'installation & D'utilisation page 36

6.5. Stainless steel ladder assembly
26
28
Step 1 : External steps
Attach the external steps be-
tween the external tubes using
the screws with nuts provided.
Warning: the external steps are
more inclined than the internal
steps. only assemble the two
lowest steps.
29
Step 4 : Last steps
Assemble the last two steps be-
tween the external tubes using
the screws with nuts provided.
36
6. INSTALLATIoN
29
Step 2 : Internal steps
Repeat for the internal steps.
These steps are not inclined to
save space in the pool.
28
Step 5 : Central platform
Assemble the central platform
between the two external tubes
using the screws with nuts pro-
vided.
27
24
Step 3 : U-shaped tubes as-
sembly
Insert the U-shaped tubes in the
external tubes. The screw holes
must be aligned.
Step 6 : Silicone feet
Insert the silicone feet on the feet
of the ladder and position them
so they lie flat on the ground.
25
30