Waterflex Fit's Pool Guide D'installation & D'utilisation page 40

Step 13 : Liner
Assemble the two liners with the zip. It should
close without excessive force.
Step 15 : Pump unit
Position the pump unit on the assembled support
and plug it into the connectors. These connec-
tors are tightened by hand and do not require
special tools for their assembly. over-tightening
might damage the fittings.
40
6. INSTALLATIoN
Step 14 : Inflatable cover
Lay the cover flat on the ground and plug the
pump unit to the mains and your cover to the
specific connector supplied.
Press the massage function to start inflating the
cover.
After the inflation, stop the pump unit and close
the cover cap.
Step 16 : Ladder
Straddle the ladder over the structure. It must
not touch the walls of the pool. The four feet of
the ladder should rest perfectly flat on the floor.