Installation; Site Selection; Rcd Test - Waterflex Fit's Pool Guide D'installation & D'utilisation

6.1. Site selection

WARNING : Before proceed to installation your spa, please make sure that the future location
meets the following conditions :
• A level place
• Wide enough to support the pool and its pump unit.
• Able to support more than 1400 kg/m².
• Sheltered from the sun and bad weather.
• Clean and free from sharp objects.
A place with an awning

6.2. RCD test

WARNING: The RCD plug must be tested before each use.
Do not use if RCD test fails and see chapter 9 Troubleshooting
1. Insert the plug into
the power outlet.
34

6. INSTALLATIoN

Clean the place
2. Press the «RESET»
button, the indicator
light turns red.
3. Press the «TEST»
button, the indicator
light turns off.
A level place
4. Press the «RESET»
button, the indicator
light turns red.
The RCD works prop-
erly.