Medela Waterless Milk Warmer Consignes D'installation Et Mode D'emploi page 8

Warmer Care
• Wipe down the warmer according to cleaning instructions on
page 4 prior to first use and in between patients.
• Wash hands before touching the surface of the warmer and
operating the device.
• If the warmer is used for more than one patient, inserts should
stay with the patient in a clean location with clear and legible
indicators of patient name, date and time.
• Refer to hospital policies for cleaning of shared capital
equipment.
Caution
Inserts are single-patient use.
Milk Present in Warmer
• Remove and discard the insert and clean the warmer per
instructions on page 4.
• Refer to hospital policy for equipment decontamination for
potential cleaning procedures unique to your facility.
Caution
Check with the manufacturer prior to using any cleaning
method outside of the manufacturer's recommendations (refer
to "Acceptable Cleaning Agents" on
Condensation Present in Warmer
• Leave the lids to the warmer open to allow the warmer to air dry
in between uses.
T Tip: Condensation may appear in the warmer when a frozen
bottle is frosted on the outside and thawed in the warmer.
6
).
page 4