Medela Waterless Milk Warmer Consignes D'installation Et Mode D'emploi page 12

IV Pole Set-Up (optional)
1. Remove IV pole adapter from shipping
carton (sold separately - #5007005).
2.
Locate the two positioning slots on
either side of the warmer.
3.
Make sure the pin on the IV pole
adapter is engaged.
T
Tip: To engage, turn the round knob clockwide until the pin
engages.
4.
While securely holding the warmer in
one hand, carefully slide the U-shaped
portion of the adapter into a positioning
slot located on the warmer until it
clicks into place.
5.
Securely hold the warmer with one
hand and the adapter with your other hand. Position the
adapter onto the IV pole.
To secure, turn the triangular knob
clockwise until the clamp is tight onto the
IV pole.
Caution
Make sure the warmer does not interfere with any other
equipment on the IV pole.
10
Pin not
engaged
Pin engaged
positioning slots
2
4
5