Medela Waterless Milk Warmer Consignes D'installation Et Mode D'emploi page 13

6.
Do not block vents on bottom or rear of unit.
Caution
Do not place warmer on a soft surface.
7.
To remove the warmer from the IV
pole adapter, pull pin out, turn ¼
turn, and release. The pin will remain
disengaged, allowing the warmer to
slide off the adapter.
Insert Installation
1.
Open the lid of the warmer.
2. Remove Medela Disposable
Insert from plastic bag.
3. For proper identification, patient labels
can be placed on the bag portion of
the insert; or using a permanent marker
patient information can be written on the
hard surface of the insert, including date
and time.
Bottom Rear
7
3
11