Medela Waterless Milk Warmer Consignes D'installation Et Mode D'emploi page 19

Thawing
1.
Press
2.
The warmer defaults to
3. Press the right arrow
highlight
4.
Press
enter
Note: The warmer defaults to frozen
when in
5.
Use the arrows to enter the volume of
milk to be thawed.
Note: If you hold down the left or right arrow
key, it will increase or decrease in increments
of 10 mL.
6.
Press the
7.
The LCD display will flash the
information that was entered into the
warmer and display the completion time.
8.
Confirm that the information is correct,
and press the
Note: If the information is incorrect, press
the button and repeat steps above.
stop
button to turn on the warmer.
mode.
to confirm
mode.
button to confirm volume.
enter
button to begin thawing.
start
mode.
to
mode.
2
4
5
7
8
17