Note: The Waterless Milk Warmer is designed to warm only one
container at a time.
1.
Always use a lid on the milk storage container.
Note: Use the proper size container in comparison to the volume
of breastmilk or supplement being warmed.
Caution
Small amounts of breastmilk or supplement in large
containers can reduce warming efficiency.
2.
Make sure insert is installed and insert
tray is properly seated in warmer.
T
Tip: The warmer will not operate if the
insert is not installed correctly.
3.
Place the container on the center of
the tray in the warmer and close the lid.
WARNING
• Use caution when warming milk in containers
and/or with lids that contain metal.
• Do not warm milk with nipple on container.
• Do not warm breastmilk storage bags.
Warming or Thawing in a Syringe
1.
Always use a cap on the syringe tip.
2.
Make sure the insert is installed and insert
tray is properly seated in the warmer.
T
Tip: The warmer will not operate if the insert
is not installed correctly.
3.
Close the lid to the warmer.
4.
Insert the tip of the syringe into the round
portion located on the face of the insert.
Gently push until the flange of the syringe
is lying flat against the insert.
2
3
2
4
13