Presetting Stations; Recalling A Preset - Sangean DPR-99 Plus Mode D'emploi

Presetting stations

There are 5 memory presets for each of the two wavebands which allow
you to quickly tune the radio to your favourite stations. Presets are
store in a memory which remembers the settings even when the radio
is switched off.
1. Press the On/Off button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button until the display shows
e.g. Preset 1 saved. The station will be stored under the chosen
preset button. Repeat this procedure for the remaining presets.
4. Stations stored in the memories may be overwritten by following the
above procedure.

Recalling a preset

1. Press the On/Off button to switch on your radio.
2. Select the required waveband.
3. Momentarily press the required Preset button, your radio will tune to
the station stored in preset memory.
17