MS-7672 Mainboard
MS-7672 Mainboard
Remember to disable Spread Spectrum if you are overclocking because even a slight
•
jitter can introduce a temporary boost in clock speed which may just cause your over-
clocked processor to lock up.
▶
VDroop Control
This item is used to select the VDroop control mode.
▶
CPU Core Voltage/ CPU I/O Voltage/ DRAM Voltage/ System Agent Voltage (SA)/
CPU PLL Voltage/ DDR_VREF_CA_A/ DDR_VREF_CA_B/ DDR_VREF_DA_A/ DDR_
VREF_CA_B/ PCH 1.05
These items are used to adjust the voltage of CPU, Memory and chipset.
▶
Current CPU Core Voltage/ Current CPU I/O Voltage/Current DRAM Voltage/ Current
SA Voltage
These items show current CPU/ DRAM voltage. Read-only.
▶
Overclocking Profiles
Press <Enter> to enter the sub-menu.
▶
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these items are used to save
the current settings, and you can to load the settings from the stored profile.
▶
OC Retry Count
When overclocking has failed, setting this item as [1, 3] will allow system to reboot
1/ 3 times with the same overclocked configuration. If overclocking has failed every
time, the system will restore the defaults.
▶
CPU Specifications
Press <Enter> to enter the sub-menu. The submenu shows the information of installed
CPU.
▶
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the installed CPU tech-
nologies. Read only.
▶
MEMORY-Z
Press <Enter> to enter the sub-menu.
▶
DIMM1~4 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the informations of
installed memory.
▶
CPU Features
Press <Enter> to enter the sub-menu.
▶
Active Processor Cores
This item allows you to select the number of active processor cores.
▶
Limit CPUID Maximum
It is designed to limit the listed speed of the processor to older operating systems.
En-34