Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Front Panel Connectors: JFP1, JFP2
These connectors are for electrical connection to the front panel switches and LEDs.
The JFP1 is compliant with Intel
JFP1
Front USB 3.0 Connector: JUSB4
USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate
up to 5 Gbit/s (SuperSpeed).
USB 3.0 Bracket (optional)
Important
Note that the pins of VCC and GND must be connected correctly to avoid possible
•
damage.
•
If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
Front Panel I/O Connectivity Design Guide.
®
* The MB layout in this figure is for reference only.
JFP2
En-17
Publicité
Table des Matières
